Matsuzawa Micro Vickers Hardness Tester (MMT Series)

Share:


Matsuzawa Micro Vickers Hardness Tester (MMT Series)

Manual Micro Vickers Hardness Tester MMT series for Micro Vickers Hardness Testing by MSP Metrology (M) Sdn Bhd from Matsuzawa Japan

 

Features

0.01µm MEASURING

Realize 0.01μm measurement at general magnification of 200x – 1,000x.

Possible to measure with accurate numerical value about a small indentation.

 


 

WIDE TEST LOAD RANGE

By wide test load range of 9 level(type A) and 12 levels(type B), testing of 1-2000gf can be done.

 


 

TESTING AREA OF INDUSTRY MAXIMUM CLASS

By a new design, testing range of specimen height 120mm and specimen depth 160mm was secured

 


 

THE UNIQUE TURRETT

The turret which mounted with two indenter and four objective lens following conventional stable loading mechanism.

 


 

COLOR LCD TOUCH PANEL

Visibility and operativity improve by color LCD. Equipped with the assist function that can identify the most suitable measurement condition

 


 

LINE UP IN LCD MODEL

Clear specimen surface image magnified on LCD monitor is displayed. Because the measurement knob is placed in the measurement panel, you can significantly reduce the fatigue of working long hours

 


 

Specifications

ITEM MMT-X7 MMT-X3 MMT-X1
Test Force      Standard Type A 49.03   98.07   245.2   490.3   980.7   1961   2942   4903   9807   mN
    5          10         25       50       100     200     300     500    1000   kgf
  Standard Type B 9.807   29.42   49.03   98.07   245.2   490.3   980.7   1961   2942   4903   9807   19614   mN
      1        3           5          10          25          50        100      200      300     500   1000   2000   kgf
Loading Mechanism   Automatic Loading and Releasing Method
Indenter Approach Speed   50µm/sec
Dwell Time 5 ~ 99 sec 5 ~ 30 sec
Indenter Standard: 1 (HV), Option: 2 (HV, HK)
Objective Lens Standard: 2 (40x, 10x ∴in case of AMT-PS/FS series: 40x, 50x), Option: Max. 4 (5x ~ 100x)
Eyepiece Lens Standard 10x, Option 15x
Total Magnification Standard (400x, 100x) Corresponding 50x ~ 1000x
Measuring Microscope (total 400x)   Max. Measuring Length 250µm
Min. Scale 0.01µm (200x~ 1000x) 0.5µm
Min. Measuring Unit 0.01µm (200x ~ 1000x) 0.1µm
Measuring Type Electronic Mechanical
Data Output Centronics (Dot printer output)
RS232C (Output for PC) Possible to change to printer output
Light Source LED Light Source
Turret Auto Manual
LCD Touch Panel Color LCD touch panel
Testing Mode 6 kinds of HV, HK, HBS, KC, Xbar, Cylindrical Correction
Data Memory 999 data memory  
Hardness Conversion Possible in compliance with SAE (J-417B), ASTM (E-140)  
OK/NG Criteria Judging to the result by setting Max. and Min.
Statistical Calculation Max. value, Min. value, dispersion (R), mean value, converted value
Accuracy According to JIS B7725 and ASTM E-384
Max. Specimen Height 120mm
Max. Specimen Depth 160mm
Dimensions and Weight Main body only W250 x D520 x H530mm, 35kg
Photo Booth Can be installed in the body tube in the upper part of the main body at any time
Power Supply Single Phase AC100 ~ 240V 50/60Hz available for export models

 


 

Optional Accessories

Touch Probe

After the equipment is installed with probe, it can be used to measure the following parameters:

  • Height, width, length
  • The angle between the two sides
  • Vertical angle of cone
  • Diameter of cylinder
  • Chamfer
  • Straightness, flatness, roundness, cylindricity
  • Verticality, parallelism, inclination, and so on.

 


 

Coaxial Light Source with Different Effect

Joystick

 

Part Accessories

4-ring 8-division LED Surface Illumination

LED Parallel Contour Illumination

Zoom Lens

Video Capture Card

CCD Camera

Calibration Glass Stage

Data Integration Box

Software Dongle

Workbench

Computer System

Linear Scale

AV Cable



 Inquiry - Matsuzawa Micro Vickers Hardness Tester (MMT Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US