Evocus High Power & Metallurgical Microscope (M50 Series)

Share:


Evocus High Power & Metallurgical Microscope (M50 Series)

Features

 


VARIOUS OBSERVATION

Brightfield, darkfield and simple polarizing are all available with M50. Brightfield image with high brightness and high resolution shows original colour of samples. And darkfield is used to show 3D relief image.

 

 


 


ERGONOMICAL HEAD FOR PLEASURE VIEWING

With the most suitable viewing degree, 30° inclined head holds everyone in the best working state, less tension and fatigue. You can adjust the interpupillary distance to optimum according to the scale on viewing head.

 

 


 


NEWLY IMPROVED OBJECTIVE LENS

With higher colour correction and better coating design, new improved LMPlan series objectives enhance the image resolution and colour reducibility.

 

 


 


OUTSTANDING CONDENSER SYSTEM

Using the outstanding condenser system, much more transmitted light can be through with bigger numerical aperture and stronger intensity.

 

 


 


ADJUSTABLE HEIGHT FOR FLEXIBLE USE

The highest sample can be tested is 28mm with transmitted & reflected frame while 78mm high sample is available with reflected frame, as the stage can be dropped 50mm by loosening the screw in the stage holder.

 

 


 


BETTER ILLUMINATION SYSTEM

Reflected illuminator with field/aperture diaphragm and oblique light device, as well as slots for polarizing kit and filters, adopts Koehler illumination system.

 

 


 

Specifications

Optical System Infinity Color Corrected Optical System
 Eyepiece High eye-point wide field plan eyepiece PL10 x 22mm
High eye-point wide field plan eyepiece PL10 x 22mm, with reticle
High eye-point wide field plan focusing eyepiece PL10 x 22mm
 Objective LWD plan achromatic metallurgical objective 5X / 10X / 20X / 50X / 100X
 Viewing Head 30° inclined gemel binocular head, interpupillary distance: 54mm ~ 75mm, left diopter ±5 adjustable
30° inclined gemel trinocular head, interpupillary distance: 54mm ~ 75mm, diopter ±5 adjustable, splitting ratio R:T = 100:0 or 50:50
 Nosepiece Reversed quantiple nosepiece
 Stage Double layer mechanical stage with X/Y coaxial adjustment, size: 175mm × 145mm, moving range: 76mm × 42mm
Metal plate for transmitted frame; glass plate for transmitted & reflected frame
 Condenser N.A. 0.9 swing-out achromatic condenser for transmitted frame, with center adjustable aperture iris diaphragm
 Focus Transmitted & Reflected frame, coaxial focus system with tension adjustment and up-limited device, coarse range: 28mm, fine precision: 0.002mm.Stage can be adjusted up and down, 28mm high sample is available
Reflected frame, coaxial focus system with tension adjustment and up-limited device, coarse range: 28mm, fine precision: 0.002mm. Stage can be adjusted up and down, 78mm high sample is available
 Reflected Illumination Wide-range voltage 100V – 240V, AC50/60Hz, reflected lamp-house with single 5W LED, warm color. Koehler illuminator with oblique light device, center adjustable field and aperture diaphragm
 Transmitted Illumination Wide-range voltage 100V – 240V, AC50/60Hz, transmitted lamp-house with single 5W LED, warm color

 


 

Accessories Diagram Chart

 



 Inquiry - Evocus High Power & Metallurgical Microscope (M50 Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US