Accretech Roundness and Cylindrical Profile Measuring Instruments (RONDCOM43C/43C-S/41C/31C Series)

Share:


Accretech Roundness and Cylindrical Profile Measuring Instruments (RONDCOM43C/43C-S/41C/31C Series)

Features

Centering/Tilting/Leveling Support Functions (Patented)

Easily adjust eccentricity and tilt between the center of rotation and the center of the workpiece simply by adjusting the displacement to zero as indicated on the bar graph in the alignment display.

 

Semi-Automatic Measuring Function with Specification of Measuring Height

All Orientation Detector (Optional) May Be Provided

The detector expands the measuring range to ±1000µm and enbles measuring force and front travel (stylus drop) adjustment.

R-axis Scale for Small, High-Accuracy Workpieces (R43C-S)

R41C Supports High Column: Z = 500 mm (Option)

 


 

Full Specifications

Model RONDCOM Series    
RONDCOM 43C-S RONDCOM 43C RONDCOM 41C RONDCOM 31C
Measuring System Manual
Measuring range Max. measuring diameter Φ200mm Φ250mm
Right/left feed range (R-axis) 100mm 125mm
Up/down feed range (Z-axis) Standard 300mm 200mm
High Column 500mm
Max. loading diameter Φ400mm
Max. measuring height (OD/ID* measurement) Standard 300mm 200mm
High Column  500mm  –
Rotation accuracy Radial direction JIS B 7451-1997 (0.02 + 6H/10,000)μm (0.04 + 6H/10,000)μm
(H: Height from table top to measuring point mm)
Straightness accuracy Up/down direction (Z-axis) Standard 0.25μm/100mm 0.5μm/100mm
0.8μm/300mm 1.5μm/300mm
High Column 0.5μm/100mm
2.5μm/490mm
Radial direction (R-axis) 0.2μm/10mm  –
Parallelism accuracy Up/down direction (Z-axis) Standard 1.5μm/300mm 3μm/300mm
High Column 1μm/100mm
Radial direction (R-axis) (0.3 + 0.1L/10)μm
Rotational speed (θ-axis) 6/min
Up/down speed (Z-axis) 0.6, 1.5, 3, 6 mm/s (Max 15mm/s) (At moving: 15mm/s max.) 5mm/s
Radial direction speed (R-axis) 0.6, 1.5, 3, 6 mm/s 5mm/s
Auto stop accuracy Z-axis/R-axis ±5μm
Rotary table Table outside diameter Φ148mm
Adjustment range of centering/tilting ±2mm/±1°
Load 15kg 25kg
Detector Detection range, Measuring force ±400μm/70mN
Stylus shape Φ1.6mm carbide ball
Stylus length L54.5 mm L15.5 mm
Type of filter Digital filter Gaussian/2RC/Spline/Robust (Spline)
Cutoff value Rotational direction (θ-axis Low pass 15, 50, 150, 500 peaks/rotation, settable any value in range 15 to 500 peaks/rotation
Band pass 1 to 500 peaks/rotation
Rectilinear direction (Z-axis) Low pass 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm (any value in 0.0001 mm units)
Measurement magnification 50 to 100 k
Roundness evaluation of form error MZC (min. zone circle method)
LSC (least square circle method)
MIC (max. inscribed circle method)
MCC (min. circumscribed circle method)
N.C. (no compensation)
MULTI (multiple setting)
Measuring items Rotational direction Roundness, Flatness, Parallelism, Concentricity, Coaxiality, Squareness, Thickness Variation, Run-out
Cylindricity, Diameter deviation
Rectilinear direction Straightness (Z), Taper ratio, Cylindricity, Squareness, Parallelism
Analysis processing functions Centering/tilting support function, Notch function (level, angle, cursor), Combination of roundness evaluation methods, Nominal value collation, Cylinder 3D profile display (line drawing, shading, contour line), Real-time display, Profile characteristic graph display (bearing area curve, amplitude distribution function, power spectrum), Semiautomatic measuring function
Display (color monitor) 17″ LCD
Display items Measuring conditions
Measuring parameters
Comments
Printer output conditions
Profile graphics (expansion plan, 3D plan)
Error messages, etc.
Recording system Color or laser printer can be selected
Other Power supply (Voltage to be specified), frequency AC100 to 120 V ±10%, AC220 to 240 V ±10%, 50/60 Hz (grounding required)
Power consumption 600 VA (except printer)
Air supply Supply pressure: 0.35 to 0.7 MPa, Working pressure: 0.3 MPa
 Air consumption volume 30NL/min
Installation dimensions (W x D x H) mm Standard   1800 x 1000 x 1800  1800 x 1000 x 1700 1800 x 1000 x 1700
 High Column   – 1800 x 1000 x 1900
 Weight (except options)  Standard   130 kg 120 kg
 High Column   – 140 kg  –

Options

  • Desktop anti-vibration table: E-VS-S57B
  • Bench for desktop anti-vibration table: E-VS-S13A
  • System rack: E-DK-S24A


 Inquiry - Accretech Roundness and Cylindrical Profile Measuring Instruments (RONDCOM43C/43C-S/41C/31C Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US